|
Installation
Accessories |
 |
GT030
Motus D Grip Handle
Used
with GT050, GT062 or GT064 to obtain more leverage when applying flat
glass films. (See Handled Squeegee Section)
|
 |
GT132
Hook Tool
Used to pull back gaskets.
|
 |
GT191
The Edge Tool
Used
to pull back gaskets. |
 |
GT190
Gray Five Way Trim Guide |
 |
GT190 White
White Five Way Trim Guide |
 |
GT190 Black
Black Five Way Trim Guide |
 |
GT135
BLADEater
Designed for
professional installers, the BLADEater holds your knife safely and
securely, and allows you to easily snap and discard blades into the
replaceable well. |
 |
GT134
BLADEater Replacement Well
|
 |
GT130
Gasket Wizard
This device
is used to carefully pull back gaskets for easy film-to-glass
installations below the gasket. Rub rails are located at the base
of all automotive door window glass and are used for weatherproofing the
openings between the glass and the door structure. Many installers
find the Gasket Wizard helpful, even without the use of the bungee
cords.
|
 |
GT921
Jiffy Steamer Film Remover
The Jiffy Steamer is a commercial steamer, impact resistant, 1300
watt heating element, heats up in 2 minutes with 2 hours of steaming per
filling. Great for removing film and adhesive off back windows.
120 Volt Use. 220 Volt available as special order. |
 |
GT979
Kevlar Heat Gloves (Pair) |
 |
GT194
Gasket Push Stick |
 |
GT176
Waist Apron |
 |
GT251
Wagner HT3500 Digital Heat Gun
This model allows you to heat shrink in low or high fan speeds and has a
variable temperature setting to fine tune the amount of heat needed for
a specific application. 120 Volt Use |
 |
GT250
Wagner Heat Gun
120 Volt Use
|
 |
GT1004
Olfa DC4 Blade Disposal
Blade disposer that can be emptied and re-used. |
 |
DOTRIX
Dot Matrix Cover
Unlike window films, the pressure-sensitive
backing allows for easy installation without heat shrinking.
Click
here for installation instructions
Click here for
FAQs regarding DOTRIX
|
